GPR applications for geotechnical stability of transportation infrastructures

Nowadays, severe meteorological events are always more frequent all over the world. This causes a strong impact on the environment such as numerous landslides, especially in rural areas. Rural roads are exposed to an increased risk for geotechnical instability. In the meantime, financial resources for maintenance are certainly decreased due to the international crisis and other different domestic factors. In this context, the best allocation of funds becomes a priority: efficiency and effectiveness of plans and actions are crucially requested. For this purpose, the correct localisation of geotechnically instable domains is strategic. In this paper, the use of Ground-Penetrating Radar (GPR) for geotechnical inspection of pavement and sub-pavement layers is proposed. A three-step protocol has been calibrated and validated to allocate efficiently and effectively the maintenance funds. In the first step, the instability is localised through an inspection at traffic speed using a 1-GHz GPR horn launched antenna. The productivity is generally about or over 300 Km/day. Data are processed offline by automatic procedures. In the second step, a GPR inspection restricted to the critical road sections is carried out using two coupled antennas. One antenna is used for top pavement inspection (1.6 GHz central frequency) and a second antenna (600 MHz central frequency) is used for sub-pavement structure diagnosis. Finally, GPR data are post-processed in the time and frequency domains to identify accurately the geometry of the instability. The case study shows the potentiality of this protocol applied to the rural roads exposed to a landslide

Multiscale modeling of granular flows with application to crowd dynamics

In this paper a new multiscale modeling technique is proposed. It relies on a recently introduced measure-theoretic approach, which allows to manage the microscopic and the macroscopic scale under a unique framework. In the resulting coupled model the two scales coexist and share information. This allows to perform numerical simulations in which the trajectories and the density of the particles affect each other. Crowd dynamics is the motivating application throughout the paper.Comment: 30 pages, 9 figure

Modeling self-organization in pedestrians and animal groups from macroscopic and microscopic viewpoints

This paper is concerned with mathematical modeling of intelligent systems, such as human crowds and animal groups. In particular, the focus is on the emergence of different self-organized patterns from non-locality and anisotropy of the interactions among individuals. A mathematical technique by time-evolving measures is introduced to deal with both macroscopic and microscopic scales within a unified modeling framework. Then self-organization issues are investigated and numerically reproduced at the proper scale, according to the kind of agents under consideration.Comment: 24 pages, 13 figure

Improving safety of runway overrun through the correct numerical evaluation of rutting in Cleared and Graded Areas

Aircraft overrun is potentially very dangerous to human life. Statistics show that overrun is mainly due to human errors causing loss of control in wheel alignment, high approach speed, and long touchdown. To prevent such disastrous consequences, advanced material arresting systems are currently being used in the main international airports for construction of Runway Safety Areas (RSAs). Many predictive models have been developed for controlling overrun events: the early reliable numerical models, on the basis of theoretical streamlined assumptions, were gradually replaced. More rigorous models based on Multibody System (MBS) and Finite Element Method (FEM) theories are nowadays much more preferred. These are characterized by high levels of reliability, even though the large number of data required does not always allow an exhaustive description of the domain of analysis. The paper presents an alternative method for predicting rut depths induced by aircraft overrunning. Such method is based on a numerical streamlined model, integrated with measurements from Light Falling Weight Deflectometer (LFWD), to define, section by section, the mechanical properties of soils in Cleared and Graded Areas (CGAs). The method has been validated through in situ tests, showing its high effectiveness and efficiency

How can macroscopic models reveal self-organization in traffic flow?

In this paper we propose a new modeling technique for vehicular traffic flow, designed for capturing at a macroscopic level some effects, due to the microscopic granularity of the flow of cars, which would be lost with a purely continuous approach. The starting point is a multiscale method for pedestrian modeling, recently introduced in Cristiani et al., Multiscale Model. Simul., 2011, in which measure-theoretic tools are used to manage the microscopic and the macroscopic scales under a unique framework. In the resulting coupled model the two scales coexist and share information, in the sense that the same system is simultaneously described from both a discrete (microscopic) and a continuous (macroscopic) perspective. This way it is possible to perform numerical simulations in which the single trajectories and the average density of the moving agents affect each other. Such a method is here revisited in order to deal with multi-population traffic flow on networks. For illustrative purposes, we focus on the simple case of the intersection of two roads. By exploiting one of the main features of the multiscale method, namely its dimension-independence, we treat one-dimensional roads and two-dimensional junctions in a natural way, without referring to classical network theory. Furthermore, thanks to the coupling between the microscopic and the macroscopic scales, we model the continuous flow of cars without losing the right amount of granularity, which characterizes the real physical system and triggers self-organization effects, such as, for example, the oscillatory patterns visible at jammed uncontrolled crossroads.Comment: 7 pages, 7 figure

Multiscale modeling of granular flows with application to crowd dynamics

In this paper a new multiscale modeling technique is proposed. It relies on a recently introduced measure-theoretic approach, which allows to manage the microscopic and the macroscopic scale under a unique framework. In the resulting coupled model the two scales coexist and share information. This allows to perform numerical simulations in which the trajectories and the density of the particles affect each other. Crowd dynamics is the motivating application throughout the paper.Comment: 30 pages, 9 figure

Inequality, competition and territorial planning

El presente artículo tiene como finalidad introducir una perspectiva de análisis no convencional en la lucha contra las desigualdades territoriales. Se pretende compartir un horizonte de reflexión centrado en dos ejes, por un lado, rescatar la importancia de lograr un abordaje que articule las desigualdades territoriales con el ordenamiento y la competitividad. Por el otro, plantear el rol que el ordenamiento cumple en la mejora de las condiciones estructurales que restringen las posibilidades de desarrollo de los territorios. Los accesos diferenciales a equipamiento e infraestructura social, la mala calidad de agua, la ausencia de inversión en mejoras productivas, la inaccesibilidad a redes de comunicación, etc. son expresiones de situaciones de desigualdad que no permiten progresar en la generación de entornos competitivos. El trabajo es una aproximación al tema, la expresión de un camino a recorrer, a futuro se continuará avanzando con estudios específicos en terreno.The present article has as purpose progress in the production of knowledge and recommendations that facilitate - in the field of decision of the local governments - the process promotion to mitigate structural inequalities in the territories. Deepening a no conventional slope in the fight against inequality, is tried to advance regard to the impact that the territorial ordering has in the decrease of socio-cultural and economic – productive inequalities. Considering that at the moment is more tie with problematic of environmental cuts, which directly overlapping with specific social and economic phenomena. The attention is focused in the conditions that determine historical - structural possibilities of development of a territory. It is clear that due to situations of space inequality the opportunities of the actors are limited powerfully, supposing differential accesses to equipment and social infrastructure, availability in quality and quantity of natural resources, alternatives of productive improvements, access to nets of communication, etc. The work must be considered a product of average term, since it is a first attempt of approach to the subject. Still it does not rely on a sufficient body of empirical contents that it sustains advances and more concrete proposals. However, this presentation has been considered valid in order to share a reflection horizon on the thematic and to raise the theoretical approach and methodological design that thinks to adopt to continue deppening in the subject matter.Fil: Benedetto, Andrea. Universidad Nacional de Cuyo. Facultad de Ciencias Políticas y Sociale

Mapping the spatial variation of soil moisture at the large scale using GPR for pavement applications

The characterization of shallow soil moisture spatial variability at the large scale is a crucial issue in many research studies and fields of application ranging from agriculture and geology to civil and environmental engineering. In this framework, this work contributes to the research in the area of pavement engineering for preventing damages and planning effective management. High spatial variations of subsurface water content can lead to unexpected damage of the load-bearing layers; accordingly, both safety and operability of roads become lower, thereby affecting an increase in expected accidents. A pulsed ground-penetrating radar system with ground-coupled antennas, i.e., 600-MHz and 1600-MHz center frequencies of investigation, was used to collect data in a 16 m × 16 m study site in the Po Valley area in northern Italy. Two ground-penetrating radar techniques were employed to non-destructively retrieve the subsurface moisture spatial profile. The first technique is based on the evalu¬ation of the dielectric permittivity from the attenuation of signal amplitudes. Therefore, dielectrics were converted into moisture values using soil-specific coefficients from Topp’s relationship. Ground-penetrating-radar-derived values of soil moisture were then compared with measurements from eight capacitance probes. The second technique is based on the Rayleigh scattering of the signal from the Fresnel theory, wherein the shifts of the peaks of frequency spectra are assumed comprehensive indi¬cators for characterizing the spatial variability of moisture. Both ground-penetrating radar methods have shown great promise for mapping the spatial variability of soil moisture at the large scale

Small-Scale Compressed Air Energy Storage Application for Renewable Energy Integration in a Listed Building

In the European Union (EU), where architectural heritage is significant, enhancing the energy performance of historical buildings is of great interest. Constraints such as the lack of space, especially within the historical centers and architectural peculiarities, make the application of technologies for renewable energy production and storage a challenging issue. This study presents a prototype system consisting of using the renewable energy from a photovoltaic (PV) array to compress air for a later expansion to produce electricity when needed. The PV-integrated small-scale compressed air energy storage system is designed to address the architectural constraints. It is located in the unoccupied basement of the building. An energy analysis was carried out for assessing the performance of the proposed system. The novelty of this study is to introduce experimental data of a CAES (compressed air energy storage) prototype that is suitable for dwelling applications as well as integration accounting for architectural constraints. The simulation, which was carried out for an average summer day, shows that the compression phase absorbs 32% of the PV energy excess in a vessel of 1.7 m(3), and the expansion phase covers 21.9% of the dwelling energy demand. The electrical efficiency of a daily cycle is equal to 11.6%. If air is compressed at 225 bar instead of 30 bar, 96.0% of PV energy excess is stored in a volume of 0.25 m3, with a production of 1.273 kWh, which is 26.0% of the demand

Experimental investigation on CO2methanation process for solar energy storage compared to CO2-based methanol synthesis

The utilization of the captured CO2 as a carbon source for the production of energy storage media offers a technological solution for overcoming crucial issues in current energy systems. Solar energy production generally does not match with energy demand because of its intermittent and non-programmable nature, entailing the adoption of storage technologies. Hydrogen constitutes a chemical storage for renewable electricity if it is produced by water electrolysis and is also the key reactant for CO2 methanation (Sabatier reaction). The utilization of CO2 as a feedstock for producing methane contributes to alleviate global climate changes and sequestration related problems. The produced methane is a carbon neutral gas that fits into existing infrastructure and allows issues related to the aforementioned intermittency and non-programmability of solar energy to be overcome. In this paper, an experimental apparatus, composed of an electrolyzer and a tubular fixed bed reactor, is built and used to produce methane via Sabatier reaction. The objective of the experimental campaign is the evaluation of the process performance and a comparison with other CO2 valorization paths such as methanol production. The investigated pressure range was 2–20 bar, obtaining a methane volume fraction in outlet gaseous mixture of 64.75% at 8 bar and 97.24% at 20 bar, with conversion efficiencies of, respectively, 84.64% and 99.06%. The methanol and methane processes were compared on the basis of an energy parameter defined as the spent energy/stored energy. It is higher for the methanol process (0.45), with respect to the methane production process (0.41–0.43), which has a higher energy storage capability